Bosh WFK2801GB/01 1min in display

[allan73]

Can anyone help me out on this one, m/c aborts with 1 min in display intermitently. when it does this customer say’s there’s usually water in drum and door is locked.

Allan

[allan73]

Re: Bosh WFK2801GB/01 1min in display

Can anyone help me out on this it’s quite far away so I was hoping to go pre armed with info ❓
I was thinking pump intermittent maybe ❓

[boselecta]

I believe ‘1 min’ in display is the time out code on these machines.

So It could be pump, heater, inlet valves, motor etc.

hope that helps.

[allan73]

Re: Bosh WFK2801GB/01 1min in display

Thanks boselecta, I’ll check the usual suspects. 😉

[allan73]

Re: Bosh WFK2801GB/01 1min in display

Fitted a new pump to this last week, pump was definately shot and thought all was well. Now customer complaining still aborts with 1 min in display intermittently but now it’s empty when this happens 😕

Customer also say’s it does this at end of cycle and washing seems to be spun ok.

Any Bosh guys out there who can help me out on this.

Allan.

[philfish]

Re: Bosh WFK2801GB/01 1min in display

Did you megger the heating element? They can make it throw a wobbly at times if its only slightly down to earth.

phil

[allan73]

Re: Bosh WFK2801GB/01 1min in display

Thanks Phil, I’ll go back & check for earth leaks. If I can’t find any low ins is it likely to be a board fault ❓

[Bernie]

Re: Bosh WFK2801GB/01 1min in display

It has come up before have a look here:-
http://www.ukwhitegoods.co.uk/modules.p … +wfk2801gb

[Author]

Posts