Beko DWD4310 d/w not filling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DWD4310 d/w not filling

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 27, 2010 at 1:19 pm #57523
    Pigpen4
    Participant

    Where is the pressure switch on these machines?
    It drains but won’t fill.
    Fill solenoid works OK, letting water in nicely when I operate it with my test lead.
    Replaced PCB – made no difference.
    Replaced flow meter – made no difference.
    Anyone got any info, please?
    Thanks,
    Pigpen.

    September 27, 2010 at 4:30 pm #331405
    nigegt
    Participant

    Re: Beko DWD4310 d/w not filling

    Could be the overflow switch in the base thats melted inside. Come across this a few times and it makes them do some weird and wonderful things.

    Nige

    September 27, 2010 at 5:33 pm #331406
    Pigpen4
    Participant

    The overflow switch is working fine.
    Any other ideas?

    September 27, 2010 at 6:26 pm #331407
    Seamy
    Participant

    Re: Beko DWD4310 d/w not filling

    Overflow switch or warped polystyrene float are the most likely things to be causing the problem, have had lots of Beko’s like that. Otherwise cable connections onto board or flowmeter.

    September 27, 2010 at 8:35 pm #331408
    Jazzmeister
    Participant

    Re: Beko DWD4310 d/w not filling

    Or wiring loom required, have had this 3 times before!

    Jazz!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.