Integrated dishwasher ADG-7450

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Integrated dishwasher ADG-7450

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 27, 2010 at 2:37 pm #57528
    x-celerate
    Participant

    I’ve had this dishwasher for several years but it suddenly stopped washing the dishes. Water fills at the base. The spray arms / filters are not blocked.

    Initially the fault code was three flashes but this disappeared after unplugging the machine. I also checked resistance on the NTC , it was reading around 13 kohms when the machine was off.

    I would interested to know if anyone knows what the fix is.

    Thanks

    October 7, 2010 at 11:30 pm #331423
    baldy55
    Participant

    Re: Integrated dishwasher ADG-7450

    Problem could be your circulating pump. If you look at circulating pump does it look like a bigger version of drain pump. These give alot of trouble and are replaced with a revised circulating pump. The revised pump has got a capacitor attached to the side and if this is the style of pump the capicitor may need to be replaced?

    October 8, 2010 at 12:37 am #331424
    clivejameson
    Participant

    Re: Integrated dishwasher ADG-7450

    Have a look HERE

    November 28, 2010 at 5:39 pm #331425
    x-celerate
    Participant

    Re: Integrated dishwasher ADG-7450

    Thanks for the advice. Pump replaced. Fault fixed.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.