AEG Lavamat 50700

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG Lavamat 50700

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 5, 2010 at 10:22 am #57720
    jackster
    Participant

    Hi all, I have got a call to the above machine on thursday am and as my experience of these m/c are limited I thought I would get some advice before I go. The fault is that it spins as it should do first but it doesnt go onto the final spin, the cm has to move it on manually to open the door? Any common faults with these?

    October 5, 2010 at 10:35 am #332083
    electrofix
    Moderator

    Re: AEG Lavamat 50700

    when customer moves it on full or empty of water

    ?rinse hold

    Dave

    October 5, 2010 at 10:55 am #332084
    jackster
    Participant

    Re: AEG Lavamat 50700

    Hi, sorry it was empty.

    October 6, 2010 at 12:31 am #332085
    leavemetogetonwithit
    Participant

    Re: AEG Lavamat 50700

    Modern Lux. Would suggest comprehensive search for low insulation esp. htr. ele(s) & mtr. Anything below 40 Mohm = problem.
    Mike.

    October 6, 2010 at 7:50 am #332086
    Martin
    Participant

    Re: AEG Lavamat 50700

    jackster wrote:Any common faults with these?

    Likely as not the air pressure tube is gunged up. It’s an old model no doubt done lots of mileage, also check those brushes while you’re there.:wink:

    October 6, 2010 at 10:19 pm #332087
    leavemetogetonwithit
    Participant

    Re: AEG Lavamat 50700

    Martin wrote: It’s an old model ….

    Didn’t realise that. You can probably ignore my post above as it only really relates to newer models with EWM2000 type boards that are a b*gg*r to get access to.
    Mike.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.