Bosch WAS32466GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAS32466GB/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 6, 2010 at 6:39 pm #57768
    ChrisR
    Participant

    Hi Guys.

    I`m trying to fit a new door inner to this machine but the door handle locks when all screws tightened.

    I`ve had to bring it home as I cannot see what I`m doing wrong.

    Any suggestions.

    Thanks.

    Chris. 😀

    October 7, 2010 at 7:20 am #332245
    Martin
    Participant

    Re: Bosch WAS32466GB/01

    I changed one back in July and as far as I recall the door lock probe has to be hooked into the handle before snapping the two halves together. No force required mind! 😉

    October 7, 2010 at 9:31 pm #332246
    ChrisR
    Participant

    Re: Bosch WAS32466GB/01

    Thanks. Martin.

    There must be more than one type of door inner.The one Bosch sent has too much plastic in the area where the handle pivots thus locking it when screwed down.
    Cut some away with stanley knife and hey presto job done. 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.