creda concept halogen cooker 48345

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › creda concept halogen cooker 48345

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 11, 2010 at 10:58 pm #57902
    hilly
    Participant

    when the main oven is in use if you open the main oven door it trips the mains rcd, but it works completely fine if you turn the oven stat off before opening then back on again it will continue fine, ive checked the door switch and its switching ok could anything else cause this (sudden stopping of fan or heat drop?)
    gonna replace the door switch to try it but im not convinced

    thanks paul

    October 12, 2010 at 8:03 am #332616
    trotter
    Participant

    Re: creda concept halogen cooker 48345

    Paul,

    The only thing that operates when you open the door is the fan motor isn’t it?…..that is operated by the door switch, which you have checked.

    SO I would look at the fan motor and/or wiring I agree that it is unlikely to be the switch itself although a badly insulated wire could be the cause?

    ❓

    October 12, 2010 at 9:07 am #332617
    electrofix
    Moderator

    Re: creda concept halogen cooker 48345

    it also turns off the element

    have you disconnected the element and tried it also disconnect grill elements

    would megger all elements it can be the grill element or lower top oven element if it has one
    dont assume if its an earth fault it can be measured

    dave

    October 24, 2010 at 5:11 pm #332618
    hilly
    Participant

    Re: creda concept halogen cooker 48345

    thanks for the replies, i went through everything but missed that the light bulb wasnt working, replaced bulb and hey presto job done 😳 😳

    thanks again

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.