Whirlpool Oven AKZ161/IX/02, 858516115090

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool Oven AKZ161/IX/02, 858516115090

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 14, 2010 at 1:12 pm #57974
    roly16
    Participant

    Hi guys,

    This display is coming up with fault code F01, which SIOS lists as temperature sensor open- or short-circuit.. The temperature sensor seems to be working at around 1Kohm so I assume it’s a pcb fault.

    I assume it’s the main/power pcb part no. 481221478306, but could it be control unit 481221458469?

    The lady at Whirlpool trade spares assures me that the power pcb comes ready configured and SAM is not required. Is this correct?

    Thanks

    Geoff

    October 17, 2010 at 6:52 pm #332859
    roly16
    Participant

    Re: Whirlpool Oven AKZ161/IX/02, 858516115090

    Can anybody help me with this one ?

    October 17, 2010 at 7:24 pm #332860
    eastlmark
    Moderator

    Re: Whirlpool Oven AKZ161/IX/02, 858516115090

    AFAIK, the board is not configured but is done so by cutting out links as per the instructions supplied guided by a mysterious number that is quoted on the rating plate…..the one I did recently did not have any such number so I took a wild guess….and it worked and no recall so far.
    these are horrible ovens! Expect the word STOP as soon as you re connect the power which may or may not dissapear by fiddling with the buttons.

    I had the same fault as you, power board was the culprit but I had changed the ntc first with no result but left it in anyway.

    October 17, 2010 at 8:12 pm #332861
    roly16
    Participant

    Re: Whirlpool Oven AKZ161/IX/02, 858516115090

    thanks Mark

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.