- This topic has 5 replies, 2 voices, and was last updated 15 years, 5 months ago by
.
-
Posts
-
hallo this dw needs new pcb which we have,there is a mod to dowith it namely changing the plugs sicasym for g and h control.in case of equivilent control the wire at module terminal clanp 5 of appliances up to ki12 must be cut through and fitted to enclosed double terminal at wire clamp 7.in laymans terms on the sheet which way is terminals 5&7 from the right or left looking at the card straight on,any one done one please,richard. 😕
Re: bosch sgs8812gb/35
What are you like eng14? Why didn’t you post this question in the other thread you raised on the subject eh? 😉
I answered you earlier question on the subject in detail and even sent you a coding sheet via email (no response from you regarding the latter):rolls:
Having got that off my chest I suggest you ignore the 2 terminal connector block modification and just configure the board the way I showed you. 💡
Perhaps at some point you can let me know how you get on, maybe? 😕
Re: bosch sgs8812gb/35
martin sorry yes we did try with code u sent found some of my old ones as well.no this mc will not play ball,all progs are fine except quick wash which will not come down from 145 mins.thats why i put it back on the site,watch this space 😳
Re: bosch sgs8812gb/35
eng14 wrote:all progs are fine except quick wash which will not come down from 145 mins.thats why i put it back on the site,watch this space 😳
Apology accepted by the way. Now, the problem you have with Quick Wash is simply that you have not configured it correctly. With all the info I have given you I would ask that you simply go again with the configuration (with the module out of the fascia) and reset it. Once done, quick wash should show up at around 30 mins IIRC…OK?
Re: bosch sgs8812gb/35
thankyou very much martin,ill reset out of facia on 2 reset buttons and start again richard, 😀
- You must be logged in to reply to this topic.