- This topic has 3 replies, 3 voices, and was last updated 15 years, 5 months ago by
.
-
Posts
-
Hi,
Washer found dead on arrival, el. supply ok, so I am betting on a door lock. However a whirlpool techn told me the door locks on these machines are rarely a problem and it is more often than not a timer problem.The lock is a 3 pin connection type i.e terminals labelled 3, 45, 6.
Question: What pins are Live and Neutral and is Switch the 45 pin?In the unlocked position I have continuity between 3 and 6 and open cct between 3 and 45 and open cct between 45 and 6.
In the locked position I have the same; I therefore assumed the lock is faulty because pin 45 remains open cct in relation to pins 3 and 6.
Is my rationale correct and has anyone come across something similar?
Many thanks,
Conor!Re: Whirlpool AWO/D 4505 859233215000
PS Is this door lock mechanical or electronic in operation? I ask because when disassembled I couldn’t see anything mechanical in its operation.
Ta very much!!!Re: Whirlpool AWO/D 4505 859233215000
Could be resistor R020 on the control board.
It’s a 22ohm 2watt wirewound.
I’ve had a few do this.
- You must be logged in to reply to this topic.