- This topic has 3 replies, 2 voices, and was last updated 15 years, 5 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Hi everyone,
this machine was working fine, my missus switched it onto a cycle, it came on as normal for a second or two, then went off, so she pushed the power button off and back on, and it came on for a second, then went back off and now nothing – no lights, nothing at all.
checked fuse in spur and plug itself, all ok.
do i start with door switch or what?
any suggestions gratefuuly appreciated as usual
thanks in advance :usual suspects are the on off switch itself
then the door lock
they do tend to melt the terminals on the on/off switch on the live side
plug out if checking
Re: Hotpoint wd62 stopped completely no lights- nothing
ok cheers
will give it a go, & i will let everyone know what happens
ta
pete
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.