Indesit D63 Dishwasher…Help

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit D63 Dishwasher…Help

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 13, 2004 at 3:47 pm #5827
    Forzamc
    Participant

    Can anyone help,

    We have an Indesit D63 Dishwasher that had developed a fault,

    When put though a cycle the machine empties itself, fills wif water, but then when it tries to pump the water into the machine (through the spinners) the pump runs for a second then stops, you can see the water trying to be pumped up the machine, but the pump keeps stopping.

    Any Ideas???????

    Could it be a defective float switch ?

    Thanks

    July 13, 2004 at 3:58 pm #113996
    Martin
    Participant

    Re: Indesit D63 Dishwasher……………..Help

    Forzamc,

    It is likely the main Circulating Pump has got a blockage and maybe jamming as a result (i.e Piece of glass stuck in it?) It is worthwhile getting someone to check it out for you. The worst senario would be a new Motor/Pump unit required (not expensive), but an engineer would need to check it out?

    What is your Postcode?

    Martin

    July 13, 2004 at 4:38 pm #113997
    Forzamc
    Participant

    Re: Indesit D63 Dishwasher……………..Help

    Martin, thanks for the reply,

    I dont think the pump is jammed because you can spin it freeley, and they is no indication of it being blocked, as i said before the pump actually turns for a couple of seconds and you can see the water rise, although the pump does get very hot.

    Thanks

    July 13, 2004 at 4:54 pm #113998
    Dave_Conway
    Participant

    Re: Indesit D63 Dishwasher……………..Help

    Forzamc wrote:although the pump does get very hot.

    There’s the problem then 😉

    To give you an idea, the main circulation pump/motor is around the £65 plus VAT mark for the part.

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.