My old new dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › My old new dishwasher

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 26, 2010 at 10:24 pm #58327
    jonesp1
    Participant

    Hi,

    Basically my Neff S5443X1GB/29 stopped heating the water. We are due to move in the next few months so just needed something to tide us over.

    I have purchased a second hand Bosch SHV43A03GB. The only fault with the machine is a loud motor.

    Got it all plumbed in tonight and just after its finished filling with water there is a loud motor type sound. This did reduce loads after about 30 seconds.

    Draining the water isn’t a problem and is quiet so its not the pump that is causing the problem.

    Two questions really. What motor could be causing this noise?
    and if it turns into a bit of a problem am I able to use the motor from my old machine?

    Thanks everyone.

    Paul

    November 3, 2010 at 9:46 pm #334110
    CJAPeterborough
    Participant

    Re: My old new dishwasher

    The noise is most likely the main circulation pump and can happen
    for a variety of reasons.
    The two machines are very similar in design but have different part
    numbers for the motors
    imho a main motor change is not an average DIY job.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.