HOOVER WASHING MACHINE

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOOVER WASHING MACHINE

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 5, 2010 at 11:40 am #58613
    cornflakes
    Participant

    MODEL: HNL 842
    N31002669089212

    WASHER FULL OF WATER UP ON ARRIVAL

    DRAINED FILTER

    OBSTRUCTION IN PUMP HOUSING

    UNIT RUNS ON SPIN WHEN SELECTED

    PUMP NOT RUNNING…VOLTAGE AT PUMP CONNECTIONS 2.3 VOLTS ONLY
    WITH NO PUMP IN CIRCUIT

    HAS HIGH CURRENT DRAW FROM PUMP WHILST BEING RESTRICTED WITH OBSTRUCTION TAKEN OUT MODULE

    JUST EVALUATING WHICH IS MORE COST EFFECTIVE..REPAIR OR REPLACE

    GRAHAM

    THANKS

    November 5, 2010 at 12:31 pm #335091
    Phidom
    Participant

    Re: HOOVER WASHING MACHINE

    Not done a Hoover but I repaired a Servis module with the same fault. I traced the wiring from the pump to a small triac which I could buy cheaply.

    November 5, 2010 at 8:23 pm #335092
    A1TEC
    Participant

    Re: HOOVER WASHING MACHINE

    Had the same on a Candy, new board by the looks of it. 🙁


    John.

    November 5, 2010 at 10:33 pm #335093
    deltra
    Participant

    Re: HOOVER WASHING MACHINE

    quite common on these, qer repair these boards for approx £30.

    November 6, 2010 at 8:29 am #335094
    robbra
    Participant

    Re: HOOVER WASHING MACHINE

    I had this, sent the board to EMW. They sent it back with a note that this machine leaks from the hose at the top of the tub or dispenser and shorts the pump. I covered the pump when fitting the new board.
    Rob

    November 8, 2010 at 8:00 pm #335095
    loopey
    Participant

    Re: HOOVER WASHING MACHINE

    Blocked pump will do it every time some of the core boards werent programed correctly . WONT TIME OUT so it trys to pump out till the triac burns out ..allegedly so i here on the grape vine .. but hay thats just my opinion….

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.