Creda 37603 tumble dryer wire diagram

I was wondering if someone could help me with this issue. Last week my old Creda Autodry DL (tumble dryer modnr 37603) gave a burning smell. After looking at it, it just was some dust in the heating element. No problem so far, but because I had to open the appliance some of the wires of the clocktimer came loose.

Since I didn’t expect this, I didn’t wrote down the wire locations.
Now I’ve 3 loose wires, and 3 locations, so I’ve 9 options.

These are the wires:

– a white/black wire, goed to a thermostate and becomes a red wire there.
– a blue wire, is a “null” from the main supply.
– a brown/black wire, goes to a capacitor next to the motor.

I’ve the following positions left on the timer: 1, 9, 17
The timer has two more wires which are still on their right positions ( on pos 3 a white/pink wire and on pos 19 a black/red wire)

The timer is a “Eaton”, simple 120 minutes counter.

I hope someone can help me with this. I live in The Netherlands, and there the Creda brand isn’t supported anymore. Calling to Indesit NL and even Indesit/Creda UK didn’t give a clue.
Since my wife needs the tumble dryer, especially in this season, I need to repair it as quickly as possible.

Thanks in advance,

Ewout van Dort
The Netherlands