- This topic has 3 replies, 2 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
Machine will heat for a short while (5 or 10 minutes), then the program will pause. The problem is the same on every program selected, ‘timed’ or ‘sensor-dry’. I tested the machine using damp towels.
I checked the venting system which was fine. The two thermostats on the heating box, are regulating stats, so i can rule those out? I expect it to be an exhaust stat. How is the best way for me to test this?
Thanks in advance, i really hate this model type! Everything seems so awkwardly placed 😥
Re: Hoover 8kg sensor dry T/D – HNV380-80 – pauses during cy
had another look at this, machine works for 5/10 minutes, then pauses. Once it has failed, the only program i can run is ‘freshen up’ which has no heat (as intended)
Any other program selected will instantly (after the briefest jerk of the drum) pause again. Makes a clicking noise.
Am ordering PCB module and sensor (one with the two skinny black wires).
will report back when i have fitted and worked out which was at fault.
Re: Hoover 8kg sensor dry T/D – HNV380-80 – pauses during cy
Had a candy version of this machine doing the same. Module was at fault.
- You must be logged in to reply to this topic.