- This topic has 6 replies, 2 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
I called to this machine today and found all the lights flashing. Is this a fault code ?? How is it read ?? I found the drain pump was blocked but any time I tried to select a prog all the lights started flashing. Help please.
Re: Miele G 679 Dishwasher
All lights lit means theres been a fault ( pump blocked ) in your case..
you now need to delete the fault code, think this is how you do it —
Open door& switch off-
Press & hold buttons 1 & 3 together
Switch on & release the buttons
Salt & programme button 2 will flashSwitch off
Still got a problem. I did as Seamy said , turned it on and all lights flash again. I tried resetting again and now lights 1,4 and 5 stay on and 2 and salt flash. Any ideas please.
I found the way to unlock this machine.
Open door and switch off machine.
Press buttons 2 and 3 and turn on.
Press solo botton twice and turn off.
Turn on.That has unlocked the prog but now the machine turns on , drains and fills for 2 seconds and then stops with the selected prog light flashine. I have tested the flow meter , its ok.
Any ideas please ??
- You must be logged in to reply to this topic.