- This topic has 4 replies, 3 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
I know its been covered a few times before but Connect are showing that a facia panel is required when you fit the board. The serial is 307080300.
Do I need the panel and what is the correct board.
Thanks in advance gents, I’ve been searching this one for the last half hour and still can’t decide on the right one 😕TC
Re: BFI620 module
hi tc,
the number 307080300 is the commercial code, you will need the serial number to locate the correct part for 100 bit timer module and console panel.
Bob.Re: BFI620 module
Thanks Bob. That explains my confusion. Connect are showing that code instead of the serial number. Whats the difference or relevance in the commercial code?
TC
Re: BFI620 module
Customer should have gone to Specsavers. 😉
The serial number is a nine digit number, those are 8 or 10. ❓
There is no mention of the need to change the console as both PCB’s are available.
The modified, later set up has a different PCB, console, wiring and ‘P’ button, they are not interchangeable.
Before serial number 61129.9999 you need a C00143206,
After serial number 61130.0000 you need a C00143222.Jim.
- You must be logged in to reply to this topic.