Siemens T1200A fault codes

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Siemens T1200A fault codes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 20, 2010 at 10:30 am #59021
    timangie
    Participant

    Hi, Just fitted a new pump motor to our Siemens Extraklasse T1200A top load washing machine but now it wont run and gives a fault code of 83. Can anyone advise what the fault codes are on this machine. Ive checked all the wiring connections and all seem ok. The pump had blocked which had burnt the old motor out, could this have affected other circuitry?
    The E-Nr. is WP91281GB/05, FD 800100099.
    Tim

    November 20, 2010 at 10:55 am #336508
    CJAPeterborough
    Participant

    Re: Siemens T1200A fault codes

    Assuming the pump is good and the wiring is as it should be then….
    I cant help you with the fault codes but I have seen control board damage
    as a result of a burnt out motor.
    Check the pcb and the tracks that go to the pump connector and see if there
    is any sign of damage.
    If you are handy with a soldering iron you may be lucky.

    November 20, 2010 at 12:10 pm #336509
    timangie
    Participant

    Re: Siemens T1200A fault codes

    Thanks for that, I will have a look at the PCB.
    Tim

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.