- This topic has 4 replies, 3 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
Have a job to replace a drive belt on this dryer..there as been posts on certain hotpoint, saying how difficult they can be..does this apply to this model. please John
Re: Indesit iS60V Tumble Dryer
Nice job really.
Top and side off.
Fan cowl off & front fan off.
Tension pulley off.
Tease belt over front of drum and over motor shaft.
Put belt in place. Fit tension pulley last. This can be tricky but do-able.Re: Indesit iS60V Tumble Dryer
Actually its even easier than that. I read it as a condenser, yours is a vented, sorry.
😳
You will need something to help you stretch the belt over the motor shaft.
I use an 4 inch extension from a 1/2 inch socket set.Re: Indesit iS60V Tumble Dryer
ive since found something even better, the round cross sections often cause the belts to stick too much, so now use an L-cross section runner support from an old b/u d/o and hook that over the motor, it also has the ability to flex slightly, so your not stressing the motor pinion quite so much
- You must be logged in to reply to this topic.