Invensys MPV01SV regulator

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Invensys MPV01SV regulator

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 28, 2010 at 6:14 pm #59202
    geoff1
    Participant

    Hi

    Can anyone recommend a replace regulator for the invensys type. I am having a lot of these blue reglators failing on stoves/belling cookers and are quite pricey.
    Original 082590800

    Geoff

    November 28, 2010 at 7:04 pm #337343
    Allsorts
    Participant

    Re: Invensys MPV01SV regulator

    Qualtex has that one in at £10.39 but they don’t list a replacement.

    November 28, 2010 at 7:09 pm #337344
    geoff1
    Participant

    Re: Invensys MPV01SV regulator

    Hi

    yes they are all about £10/11 pounds plus vat plus delivery but the diamond is only about £6/7 if there is a suitable replacement.

    Customers seem to wait until there are 3/4 gone before calling and that gives them a heafty bill.

    Just hoping that someone have been down this avenue before

    Geoff

    December 1, 2010 at 8:44 am #337345
    keithwilliams
    Participant

    Re: Invensys MPV01SV regulator

    yes i have. i dismantled a diamond h and an old invensys and figured out how to wire them up. annoying thing is it worked perfectly and i wrote everything down. but i lost it. so the answer is yes it can be done, just take a couple apart and see. in fact while i’m snowed in i might just do it myself.
    keith

    December 10, 2010 at 9:47 pm #337346
    geoff1
    Participant

    Re: Invensys MPV01SV regulator

    Update

    Have been fitting 40ER101c19 instead of these invensys regulators with great success.

    Only one problen to date was on a stoves cooker where the screw holding the facia on stopped the regulator fitting correctly. 😡 Ah well cannot win them all

    Geoff

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.