Hoover VHD 814-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover VHD 814-80

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 29, 2010 at 6:12 pm #59225
    ddirect
    Participant

    Been to a Hoover VHD 814-80 today,no fault code displaying.
    the machine will fill then the drum will turn a couple of times then does nothing. thought possible heater problem checked resistance of heater and ntc both ok as was the wiring,
    has anyone had same problem, help appreciated. checked spin, drain, reciculating pump. all working.
    Darren

    November 29, 2010 at 6:48 pm #337400
    A1TEC
    Participant

    Re: Hoover VHD 814-80

    Have you checked the brushes? had one with similar fault, found one brush totally worn and the other o.k 😕


    John.

    November 29, 2010 at 7:17 pm #337401
    ddirect
    Participant

    Re: Hoover VHD 814-80

    customer did say he renewed brushes about a month ago will have a look to see if hes done something not quite right, but the machine does have motor action,so cant really see that as being the problem, but if ive got no ideas then im not going to ignore someone elses so will arrange to go back, and check, anymore comments welcome.

    November 29, 2010 at 7:54 pm #337402
    shaun67
    Participant

    Re: Hoover VHD 814-80

    When you checked heater did you meggar it ? Just a thought.
    Shaun

    November 29, 2010 at 9:23 pm #337403
    ddirect
    Participant

    Re: Hoover VHD 814-80

    good thought shaun didnt do insulation test just checked continuity and resistance, hmmm

    November 29, 2010 at 10:09 pm #337404
    shaun67
    Participant

    Re: Hoover VHD 814-80

    I always use meggar when testing motors and heaters ..had heater not too long ago pass on resistance test but failed when i checked for insulation .Worth a shot while you are there .

    Shaun

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.