Siemens washing Machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens washing Machine

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 29, 2010 at 11:20 pm #59238
    Kielykid64
    Participant

    Hi Guys,
    Siemens washing machine E12.46. Customer said it stopped short of the spin 16 mins to go and when she went to spin it displayed F21. This machine is 3 years old. It will not lock the door or get passed the display. I checked the motor brushes, the pressure switch,the element ,the pump, Is it a PCB . I wouldn’t have said it was a siemens fault to pop a board.
    If I could get it to reset ? It has the static sensor panel on the facia , but I’m stumped on this one !

    Thanks , Maurice.

    November 29, 2010 at 11:28 pm #337417
    DDDave
    Participant

    Re: Siemens washing Machine

    I dont know if its the same reset system as the Bosch when it shows F21. The Bosch reset is – turn dial to spin, hold in spin speed button , turn dial one click clockwise, release botton, turn dial to off. Hope that helps.

    November 30, 2010 at 8:19 am #337418
    Martin
    Participant

    Re: Siemens washing Machine

    Kielykid64 wrote:Siemens washing machine E12.46.

    That’s not the correct model number, try again.

    November 30, 2010 at 7:02 pm #337419
    Kielykid64
    Participant

    Re: Siemens washing Machine

    DDDave wrote:I dont know if its the same reset system as the Bosch when it shows F21. The Bosch reset is – turn dial to spin, hold in spin speed button , turn dial one click clockwise, release botton, turn dial to off. Hope that helps.

    Thanks Dave
    I will give it a shot. I find a lot of the bosch and siemens are similar but the facia has a chrome static touch-panel so I’m not sure if it will respond but all suggestions are welcome .
    Thanks again !!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.