AW23 E00 fault

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › AW23 E00 fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 1, 2010 at 8:31 pm #59287
    cornwell40
    Participant

    Customer has just rung me to report an E00 fault on the machine. Any ideas what it relates to?

    TC

    December 2, 2010 at 10:45 pm #337575
    Steven
    Participant

    Re: AW23 E00 fault

    Had exactly the same on a Amica 1200 recently!

    Main PCB no power out put to display.

    Got no idea of the cause :rolls:

    Steven

    December 2, 2010 at 11:13 pm #337576
    cornwell40
    Participant

    Re: AW23 E00 fault

    Thanks for the reply Steven.
    Presumably a main pcb replacement then. But if no power to the display how does it show a code 😕 . Then again electronics eh 😉


    TC

    December 3, 2010 at 11:41 pm #337577
    cornwell40
    Participant

    Re: AW23 E00 fault

    A long conversation with this customer late on Wednesday
    He’ Wasn’t too inspired that noone knew this fault code’
    He tried a reset but it still wouldn’t let him into the programme.
    He was going away for a few days but not to worry the builders will let me in.
    ‘ Oh they haven’t moved anything or had the machine disconnected’ I asked.
    ‘No its still as you installed it’
    Well Mr Customer.
    1. RTFM regarding the reset it worked straight away.
    2. With no roof and no windows the machine is practically outside and with this weather it’s no piggin’ wonder it threw its hand in. It might have been worth a mention on the phone.

    Presuming this E00 was down to condensation on the board causing a problem and he is to be informed on his return not to use the machine till it gets warmer. 👿 👿

    TC

    December 3, 2010 at 11:48 pm #337578
    kwatt
    Keymaster

    Joe public, gotta love ’em.

    Or not.

    K.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.