White Knight Drier

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › White Knight Drier

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 2, 2010 at 9:42 am #59296
    frogeye
    Participant

    to replace the drive belt is access via the rear of the machine & does the fan have to come off – if so how!!?

    December 2, 2010 at 9:51 am #337608
    bazza500
    Participant

    Re: White Knight Drier

    What model no. is it?

    December 2, 2010 at 10:09 am #337609
    frogeye
    Participant

    Sorry havent got that here! Its the compact version

    December 2, 2010 at 10:39 am #337610
    chezza
    Participant

    Re: White Knight Drier

    maybe this helps http://www.ukwhitegoods.co.uk/modules.p … highlight=

    December 2, 2010 at 11:11 am #337611
    iadom
    Moderator

    Re: White Knight Drier

    Looks like the dryers of the vet labs staff are coming out in sympathy. I have just posted my brother a Zanussi dryer jockey pulley. 😉

    I have only done one or two of these. Didn’t remove the fan, removed most of the screws in the back and was then just about able to work the belt down the front of the drum. Small plate underneath to access the motor pulley for refitting.

    It is a bit of a fiddle, perhaps our kid could join you in a joint repair effort. 😆

    December 2, 2010 at 11:28 am #337612
    frogeye
    Participant

    Had a bad week my washer has just been written of too!
    Thanks for the advice

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.