Ariston A1235

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Ariston A1235

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 6, 2010 at 8:30 am #59372
    aqua_serve
    Participant

    Guys,

    Went to this machine on Saturday, machine turns on, you select any cycle and the door locks, nothing further happens, there are no fault finding LEDs giving me any further information.

    Could it be the Indesit module or am I missing something far more simple?

    Mark

    December 6, 2010 at 8:35 am #337961
    cornwell40
    Participant

    Re: Ariston A1235

    Have you checked the carbons??

    TC

    December 6, 2010 at 8:37 pm #337962
    aqua_serve
    Participant

    Re: Ariston A1235

    As it happened I haven’t, I didn’t expect that this would be the problem on this machine, probably showing my inexperience but I’ll head over tomorrow!!

    I appreciate your advice,

    Mark

    December 6, 2010 at 9:03 pm #337963
    iadom
    Moderator

    Re: Ariston A1235

    Its a good rule of thumb with most modern washers without obvious faults, check the brushes and megger the heater. 😉

    December 7, 2010 at 10:54 am #337964
    allan73
    Participant

    Re: Ariston A1235

    And don’t forget to pull on the wires at the motor 😉

    December 14, 2010 at 10:47 pm #337965
    aqua_serve
    Participant

    Re: Ariston A1235

    Thanks for the help guys, still no luck in terms of testing, I’ve double checked the brushes, element all connections and not getting anything when setting any cycle.

    The guy is only just back from a business trip so no major panic but with Xmas and the post being as it is I think my only way is to send the board off for analysis, do you agree?

    Mark

    December 15, 2010 at 10:21 am #337966
    allan73
    Participant

    Re: Ariston A1235

    Have you checked the motor toc ?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.