Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TDC30P Condenser tumble dryer with water leak.
- This topic has 6 replies, 5 voices, and was last updated 15 years, 4 months ago by
FlyingBrick.
-
AuthorPosts
-
December 10, 2010 at 7:35 pm #59500
FlyingBrick
ParticipantHave a Hotpoint Aquarius TDC30P condenser tumble dryer that leaks water from the bottom around the right had side.
Checked and cleaned out the condenser, checked the water valve on the plastic water collection bottle, black rubber bung taken out of the pipe at the rear and looks clean.
Sides taken off and fluff cleaned out but there must still be a blockage as the water forms a puddle on the floor and not into the water container. The water is gravity fed so why does it not fall straight into the water container?
Anybody with ideas where to look next when I go back on Monday.FlyingBrick
December 10, 2010 at 8:51 pm #338441Allsorts
ParticipantRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
Check there is not a crack in the plastic base where the pump is housed.
George
December 10, 2010 at 9:38 pm #338442iadom
ModeratorRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
No pump on a TDC George. 😉
December 10, 2010 at 9:39 pm #338443FlyingBrick
ParticipantRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
Is there a pump in the plastic base of a TDC30P tumble dryer?
Have not taken off the drum yet to dig deeper into the problem George. Will not know until Monday’s visit.FlyingBrick
December 10, 2010 at 10:39 pm #338444Allsorts
ParticipantRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
Ooops .. My bad … No sorry there isn’t.. I’m thinking of the CTD00 … But nevertheless, check the plastics. I just replaced the base on a CTD00 because it had cracks in the base and was leaking.
George
December 11, 2010 at 4:19 pm #338445johnnyj
ParticipantRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
you can get them leaking between the plastic duct that is siliconed and screwed onto the back panel, ive sometimes cured with silicon, if not its a bin job as part is obsolete.
December 11, 2010 at 7:55 pm #338446HotDog
ParticipantRe: Hotpoint TDC30P Condenser tumble dryer with water leak.
Thats the place to look as johnny said i have done this on a few of these just reseal with silicone make sure you use plenty i have had to do it again on one no fun to have to go back
-
AuthorPosts
- You must be logged in to reply to this topic.
