caple DI440 diaphragm switch

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › caple DI440 diaphragm switch

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 11, 2010 at 1:09 pm #59509
    Righty
    Participant

    Hi , My Caple DI440 has been giving me an error code of 4 green lights and bleeps , i reset the start buttons and it used you work and finish the cycle . It now errors more often. Looking around on the web the faulty part could be a diaphragm switch on the sump (3 o’clock position) . I thought that maybe there was some grime in it so i used a cable tie to clear it …………….before you shout , damage was done . I think i have punctured it , i now have water leaking from it . so my questions are

    1. Would that diaphragm thing give me that error ?
    2. If it does , i need to replace it , how does it come off ?

    thanks for reading

    Righty

    December 18, 2010 at 10:42 am #338460
    Righty
    Participant

    Re: caple DI440 diaphragm switch

    Update , i have managed to change the pressure sump switch with a new one so have stopped the leak , have just put it a quick wash to test it and 10 mins the dreaded 4 beeps and flashing 4 lights . Have reset the start button and it finished the cycle . Seems to bleep when it starts to pump/drain .

    What area now should i be looking ?

    thanks

    Righty

    December 21, 2010 at 11:56 pm #338461
    Righty
    Participant

    Re: caple DI440 diaphragm switch

    Another update, i can perform a rinse no problem . But on every other cycle it stops and gives the 4 bleeps needing a re-set . The most resets needed to complete a 65 C wash was 5.

    model number 854544015710

    if you can help, thanks

    righty

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.