- This topic has 4 replies, 3 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Hope I have the model correct.
The problem I have is that it is intermistant on spin. Fitted pump as it was buzzing without turning. Job done so I thought.
Its back to day but the pump is running ok and the cycle goes through to the end but there is no motor action of spin.
Does anyone have a manual to help on my return tomorrow more so to help with test programme??
Many thanks
Geoff
Re: Whirlpool AWO/D4605
geoff1 wrote:Its back to day but the pump is running ok and the cycle goes through to the end but there is no motor action of spin.
So, I have to ask, have you checked the motor and the wiring harness to it?
Check that the pressure switch chamber isn’t blocked. Come actross a few that were that gave an intermittent spin. Also have come across a broken wire at the motor plug.
Re: Whirlpool AWO/D4605
Hi
Will recheck motor wiring as last time I was there I could find no problems with it. Pressure chamber nice and clean
As to the fault it will spin one day then the next it will not.
Geoff
- You must be logged in to reply to this topic.