whirpool d/w adg7540/1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirpool d/w adg7540/1

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 6, 2011 at 5:16 pm #59993
    senseib
    Participant

    Hi, customer complains that the inlet tube to the top spray arm comes away from the coupling and then the top arm stops rotating.

    Can anyone tell me: do i need to replace the inlet tube 481253029331 or the cover sieve 481241818337 of both.

    Which one wears?

    Brian.

    January 6, 2011 at 6:00 pm #340370
    keithwilliams
    Participant

    Re: whirpool d/w adg7540/1

    what i do with these and with customers agreement is make a small hole in plastic where the tube clips in and i screw in a small stainless self tapper at slight angle to hold the tube in place. that is problem permanently solved. i screw it in adjacent to the thinner of the two waterways in the the tube assembly.
    keith

    January 6, 2011 at 6:03 pm #340371
    chezza
    Participant

    Re: whirpool d/w adg7540/1

    worth checking there are no restrictions in the tube or upper spray arm causing back pressure, which will blow these apart

    January 6, 2011 at 9:36 pm #340372
    keithwilliams
    Participant

    Re: whirpool d/w adg7540/1

    yep quite right. i kinof assumed hed have checked that. and thanks for the door seal advice he’s identified it thanks to you .

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.