whirpool d/w adg7540/1

[senseib]

Hi, customer complains that the inlet tube to the top spray arm comes away from the coupling and then the top arm stops rotating.

Can anyone tell me: do i need to replace the inlet tube 481253029331 or the cover sieve 481241818337 of both.

Which one wears?

Brian.

[keithwilliams]

Re: whirpool d/w adg7540/1

what i do with these and with customers agreement is make a small hole in plastic where the tube clips in and i screw in a small stainless self tapper at slight angle to hold the tube in place. that is problem permanently solved. i screw it in adjacent to the thinner of the two waterways in the the tube assembly.
keith

[chezza]

Re: whirpool d/w adg7540/1

worth checking there are no restrictions in the tube or upper spray arm causing back pressure, which will blow these apart

[keithwilliams]

Re: whirpool d/w adg7540/1

yep quite right. i kinof assumed hed have checked that. and thanks for the door seal advice he’s identified it thanks to you .

[Author]

Posts