HJA8362

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HJA8362

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 6, 2011 at 9:56 pm #60006
    euro
    Participant

    Had a look at this today, the light stays on at the 70 wash all the time, it wont cancel or allow you to select another wash. Both the cancel and program buttons were stuck in place. The pcb underneath looks like its had dampness on it. Anyone got any other ideas before i order pcb

    Thanks

    Andy

    January 6, 2011 at 11:32 pm #340409
    clivejameson
    Participant

    Re: HJA8362

    Yes i did have one which had got a tiny amount of spillage on the pcb which had caused one of the microswitches on the board to stick…a liberal dose of switch cleaner followed by vigorous operation of the button got it going again 😉

    January 9, 2011 at 1:46 pm #340410
    euro
    Participant

    Re: HJA8362

    Thanks for that Clive, theres been alot of spillage on this pcb, i managed to get the buttons free again but it wont cancel, looks like a new pcb is the answer this time, thanks for your advice

    Andy

    January 9, 2011 at 10:53 pm #340411
    clivejameson
    Participant

    Re: HJA8362

    The one i had did take a lot of cleaner and manipulation of the relevant switch on the pcb…i could only confirm it had worked by metering across it’s pins as it felt like it was working correctly all the time (tiny click when pushed). Never been called back…. 😆

    January 10, 2011 at 2:33 pm #340412
    euro
    Participant

    Re: HJA8362

    Thanks for that Clive, forgot to ask what the 2 red lights are on all the time for?

    Andy

    January 10, 2011 at 5:41 pm #340413
    clivejameson
    Participant

    Re: HJA8362

    Probably because the pcb thinks a button is continuously pressed?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.