HJA8362

[euro]

Had a look at this today, the light stays on at the 70 wash all the time, it wont cancel or allow you to select another wash. Both the cancel and program buttons were stuck in place. The pcb underneath looks like its had dampness on it. Anyone got any other ideas before i order pcb

Thanks

Andy

[clivejameson]

Re: HJA8362

Yes i did have one which had got a tiny amount of spillage on the pcb which had caused one of the microswitches on the board to stick…a liberal dose of switch cleaner followed by vigorous operation of the button got it going again 😉

[euro]

Re: HJA8362

Thanks for that Clive, theres been alot of spillage on this pcb, i managed to get the buttons free again but it wont cancel, looks like a new pcb is the answer this time, thanks for your advice

Andy

[clivejameson]

Re: HJA8362

The one i had did take a lot of cleaner and manipulation of the relevant switch on the pcb…i could only confirm it had worked by metering across it’s pins as it felt like it was working correctly all the time (tiny click when pushed). Never been called back…. 😆

[euro]

Re: HJA8362

Thanks for that Clive, forgot to ask what the 2 red lights are on all the time for?

Andy

[clivejameson]

Re: HJA8362

Probably because the pcb thinks a button is continuously pressed?

[Author]

Posts