whirlpool 6th sense

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool 6th sense

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2011 at 9:31 pm #60277
    hilly
    Participant

    this w/m all i can get it to do is drain when it is put on a cycle it drains then just sits there, then the door lock starts flashing, i changed the carbons on this about 2 months ago and everything else seems ok?
    any ideas pls

    thanks paul

    January 17, 2011 at 10:13 pm #341600
    leavemetogetonwithit
    Participant

    Re: whirlpool 6th sense

    Recently had this caused by low carbons – maybe need to look see if there’s one sticking.
    Mike.

    January 18, 2011 at 9:30 pm #341601
    hilly
    Participant

    Re: whirlpool 6th sense

    leavemetogetonwithit wrote:Recently had this caused by low carbons – maybe need to look see if there’s one sticking.
    Mike.

    cheers it was the brushes 😳 i replaced them not long ago so neglected to check them 😳 com worn them out already new motor req,
    many thanks paul

    January 18, 2011 at 11:24 pm #341602
    leavemetogetonwithit
    Participant

    Re: whirlpool 6th sense

    😀 Yay! I gotta print dis one out and hang it on de wall! 8) 😆
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.