zan wm faulty

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan wm faulty

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 18, 2011 at 5:22 pm #60299
    abbots
    Participant

    hi,
    FX1265W
    914792510/00

    machine switches on, door interlock activates.
    the machine will pump out for about 5 seconds and then stops dead.
    no fill or motor action on any programs.
    I.R. fine.
    carbons fine
    valves fine
    p/system fine

    any ideas?
    cheers.
    john

    January 18, 2011 at 5:28 pm #341674
    Martin
    Participant

    Re: zan wm faulty

    Posted in wrong forum John. 🙁

    But anyway it’s best you access ‘Diagnostics mode’ to suss out last error detected matey! 💡

    January 18, 2011 at 6:01 pm #341675
    abbots
    Participant

    Re: zan wm faulty

    ok ta

    January 19, 2011 at 12:48 am #341676
    leavemetogetonwithit
    Participant

    Re: zan wm faulty

    And also check for insulation resistance below FORTY MEGOHMS on heater element as that will give you exactly those symptoms. IME, if it was just a bit of damp on the motor, your initial IR would have been a fail but that’s worth a check anyway, especially if m/c in shed.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.