Hotpoint WMF760 H20

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMF760 H20

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 19, 2011 at 3:08 pm #60328
    nelson
    Participant

    I had a look at this one today customer reports that the machine locks the door then does nothing for a minute or two eventually it flashes up H20 but if she leaves the machine for ten minutes or so it will start the program and runs ok. 😕

    I checked the water feed it was ok, metered the valves was getting no power, plugged in a new pump still nothing, tested the heater was ok, checked the ntc was ok, tried a new door lock on which made no difference.

    I am thinking the board, anybody else had this?

    Any thing I am missing?

    Cheers

    January 19, 2011 at 4:12 pm #341810
    Martin
    Participant

    Re: Hotpoint WMF760 H20

    nelson wrote:Any thing I am missing?

    If you type H20 in the SEARCH box then click on TRADE TECHNICAL forum only there’s a wealth on info you will find so useful in solving this problem. 😉

    Oh how we love that search tool………… 🙂

    January 19, 2011 at 5:21 pm #341811
    nelson
    Participant

    Re: Hotpoint WMF760 H20

    Thanks for that Martin, I did search H20 but nothing really relates to the problem my customer is having. I am aware that H20 is a no fill fault but the thing that I found a bit puzzling was that after it flashed H20 when left for about ten minutes would then begin the wash and operate as normal.

    January 19, 2011 at 10:58 pm #341812
    leavemetogetonwithit
    Participant

    Re: Hotpoint WMF760 H20

    Do EMW do a board for these? If so, best option I’d say. You can always return it if no cure.
    Mike.

    January 19, 2011 at 11:59 pm #341813
    nelson
    Participant

    Re: Hotpoint WMF760 H20

    Cheers Mike I’ll check it out.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.