Bendix AW1002W fault code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bendix AW1002W fault code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 1, 2011 at 9:12 am #60673
    DDDave
    Participant

    Hi,
    Would anyone have a fault code list or link for this please. I cant find one listed here. The fault code I am getting is 4 Red 3 Green.
    Thank you.

    February 1, 2011 at 10:17 am #343186
    electrofix
    Moderator

    Re: Bendix AW1002W fault code

    have not got manual for 1002 model but have for 1001

    assuming 4 flashes end of cycle light
    3 flashes start pause light

    fault code 43 = from lux manual

    Example: Alarm E43 (problems with the door interlock triac) will display the following:
    • the sequence of four flashes of the END OF CYCLE LED indicates the first number (E43);
    • the sequence of three flashes of the START/PAUSE LED indicates the second number (E43)

    hope this helps

    Dave

    February 1, 2011 at 12:13 pm #343187
    gandh1
    Participant

    Re: Bendix AW1002W fault code

    yeah that is e43.

    first thing is to check filter sump and pump for blockages. also inspect pecker-tolock for proper engagement

    if clear, assume interlock and probable board failure, always check board before ordering an interlock, unless you have the right one handy. saves a lot of hassle.

    if filter is obstructed, clear out, and check p/s tube too. clear e43 error code from diagnostics and restart diagnostic test.

    if you get e43 again, interlock and check pcb…

    February 1, 2011 at 12:34 pm #343188
    DDDave
    Participant

    Great stuff.

    Thanks very much for the help .

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.