- This topic has 8 replies, 5 voices, and was last updated 15 years, 2 months ago by
.
-
Posts
-
Hi.Went to one of these things today.You switch it on at the plug ,press on/off button wait 8 secs`ish and all the lights light up and it bleebs.door is locked.You cannot set a programme no nothing.Think main pcb is u/s ??as i can`t find anything else wrong with the wretched thing.Prod number if this helps is 914522106/01.Anybody come across this before and do you think i`m right??Thanks.
Re: zanussi zwf1506w washing machine
It is a zwf1506w not a zwx.No that is one thing i didn`t do that is an insulation test on the element but am going back tomorrow to have another poke about at the m/ch so will check then
Re: zanussi zwx1506w washing machine
Yes mate I read what it said, but with any Zan it’s the 1st thing I do when they’re going stupid on me.
Re: zanussi zwx1506w washing machine
Will check today.Thanks for your advice.Will let you know the outcome.
Re: zanussi zwx1506w washing machine
Watch out for damp and insulation below 40 megs on htr or mtr.
Mike.Re: zanussi zwx1506w washing machine
Does this also apply to the ZWF14581w where the outlet pump runs continually?
Re: zanussi zwx1506w washing machine
From past experience it’s something I test on any Zan machine, takes a few seconds but can often save some headscratching.
Re: zanussi zwx1506w washing machine
if when you press any button machine just beebs and lights flash
try the following
disconnect the lead to the front control panel to the main pcb does not matter which end you disconnect all other wires must be intact
plug machine in
turn on and wait 5 secs or so
turn off
plug lead back in
turn on and see if it worksDave
- You must be logged in to reply to this topic.