Beko WMA767W spins on wash.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA767W spins on wash.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 5, 2011 at 3:07 pm #60809
    aqualectric
    Participant

    Beko WMA767W washer. 07 100611 07.

    This machine is trying to spin on the wash cycle: similar to the ‘jumping on wash’ fault common on old Hotpoint 95’s with burnt timer contacts. I have tested for earth leaks and the motor tacho – all seems OK.

    I’m pretty sure it’s the main module behind the control panel; anyone had this fault before?

    Thanks,

    Steve.

    February 5, 2011 at 4:09 pm #343749
    Jazzmeister
    Participant

    Re: Beko WMA767W spins on wash.

    In short yes! Main board regularly replaced for this fault!

    Jazz!

    February 5, 2011 at 8:59 pm #343750
    iadom
    Moderator

    Re: Beko WMA767W spins on wash.

    I assume you have checked the wiring harness for breaks, I have had a couple of BEKO machines with breaks at the motor plug that only revealed themselves after I pulled on the wires.

    Jim.

    February 6, 2011 at 3:10 am #343751
    aqualectric
    Participant

    Re: Beko WMA767W spins on wash.

    Thanks guys – I’ll get a PCB then. All the wires checked and continuity tested Jim…..all OK hence the question. Fortunately the PCB is very cheap!! 😀

    Cheers,

    Steve.

    February 7, 2011 at 11:19 pm #343752
    leavemetogetonwithit
    Participant

    Re: Beko WMA767W spins on wash.

    Don’t forget Beko tacho magnets sometimes break.
    Mike.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.