Belling 627w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Belling 627w

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 8, 2011 at 5:49 pm #60891
    S1MON
    Participant

    Looked at the free-standing oven for a friend, was working fine till we switched it off to replace the worktops in the kitchen.

    The oven has 240v feed but no display and no functions work

    Anyhow checked all connections and components, 240v at the terminal block, refitted incoming cable. Removed the hob and there was 240v at the chock block that feeds the hob.

    I managed to get the the neon to activate, and there was 240v at the clock. Clock itself looks ok, but unable to find a thermal fuse which i believe is located in the loom?

    obviously the clock is 100, so open to any thoughts, thanks

    February 10, 2011 at 12:26 am #344053
    leavemetogetonwithit
    Participant

    Re: Belling 627w

    Sorta sounds like it might be stuck in auto mode. But I’d think you’d have figured that. If it was defo wkg b4 you switched off y shd thermal fuse blow?
    Mike.

    February 10, 2011 at 8:51 am #344054
    S1MON
    Participant

    Re: Belling 627w

    The clock has no display at all but does not look like it has blown.

    February 10, 2011 at 9:34 am #344055
    electrofix
    Moderator

    Re: Belling 627w

    short the clock out and see if it works

    Dave

    February 10, 2011 at 3:57 pm #344056
    S1MON
    Participant

    Ok ill do that

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.