HNF71683D-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HNF71683D-80

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 10, 2011 at 9:43 pm #60956
    johnnyj
    Participant

    Was asked to look at a Hoover HNF71683D-80, washing machine the starts to fill but then starts pumping and will do this all day long, cust says it came with a fault f2 before this started, which i gather is a time out filling fault, i think it may be a module or a pressure sw fault, can anbody help me with this one please cheers.

    February 10, 2011 at 10:20 pm #344313
    suedehead1
    Participant

    Re: HNF71683D-80

    i had the same fault and cured it with a new pressure switch.

    February 10, 2011 at 10:23 pm #344314
    Specialist01269
    Participant

    Re: HNF71683D-80

    Hi Johnny: Not trying to teach my Granny to suck eggs, but have you cleaned the connections on the Module? had 1 doing the same a while back. Cleaned the connectors & away it went.

    February 11, 2011 at 1:33 am #344315
    multibrand-man
    Participant

    Re: HNF71683D-80

    is that the one where the pressure pipe comes up and across the tub then to the pressure switch if so i have had a couple of those where the pipe had a small hole in where it had rubbed through obviously timed out on fill and because it thinks it flooding automatically sticks the drain pump on

    February 11, 2011 at 5:08 am #344316
    johnnyj
    Participant

    Re: HNF71683D-80

    cheers guys, it was late when i got there, cust also wanting a couple of drum padles so i might chance it with a new pressure sw see if that cures it 1st, you dont happen to know pressure sw part/no i cannot seem to find it JJ

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.