Bosch WTA4007GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WTA4007GB/01

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 10, 2011 at 10:07 pm #60957
    knobs
    Participant

    Hi chaps
    Done a fair bit of work with these machines,but i have one that persistantly pops the reset stat after 3/4 months or so.Am ordering a set of replacement stats,any one had the same problem ?
    vent hose and wall exit grill fine,customer not overloading m/c.

    February 11, 2011 at 12:09 am #344317
    leavemetogetonwithit
    Participant

    Re: Bosch WTA4007GB/01

    Customer not stopping programme before end?
    Mike.

    February 11, 2011 at 8:25 am #344318
    Martin
    Participant

    Re: Bosch WTA4007GB/01

    knobs wrote:Am ordering a set of replacement stats,any one had the same problem ?

    The stats are pretty bulletproof TBH, so, as Mike says, stopping it before cool down could be likely. Also, the capacitor (8 mf) is a common problem, drum slow to start up, fan not blowing so the TOC trips. It’s one or the other I reckon.:wink:

    February 11, 2011 at 4:37 pm #344319
    knobs
    Participant

    Re: Bosch WTA4007GB/01

    thanks,i checked the cap,thats ok will ask customer about cooling,maybe have alook at the front bearing whilst am at it.
    cheers

    February 11, 2011 at 4:49 pm #344320
    Martin
    Participant

    Re: Bosch WTA4007GB/01

    knobs wrote:thanks,i checked the cap,thats ok will ask customer about cooling,maybe have alook at the front bearing whilst am at it.

    Stick a full load of damp towels in whilst you’re there, sit back and sup a cuppa for a spell, see what occurs? 💡

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.