Wpl Top loader washers

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Wpl Top loader washers

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 11, 2011 at 10:47 am #60964
    Steven
    Participant

    Have a 3RLSQ…. top loader not spinning fast enough even without a load?

    The pump is a bit stiff on this one, so could have been the start of the problem.

    It has a capacitor on it seems to test out ok, but no rating mf on it?

    What else on this model would prevent it from getting up to full spin?

    Any other pointers please!

    Cheers
    Steven

    February 12, 2011 at 11:50 am #344360
    electrofix
    Moderator

    Re: Wpl Top loader washers

    there is a spin clutch on top of the gearbox

    481969018152


    check for oil contamination from failing gearbox seals

    its an easy fit though you can drop the box in under 15 mins

    Dave

    February 12, 2011 at 4:31 pm #344361
    clockworkone
    Participant

    Re: Wpl Top loader washers

    dont know the age of your m/c but corrosion on spin tube will cause a slow spin on these, expensive repair as outer tube will be corroded as well. as dave said these are a very easy stripdown .had one that had not been used for a while and after stripdown and a bit of freeing of clutch and brake m/c kicked back into life and ran fine(cap is 22 if memory serves me right but check it out before you put one in)paul

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.