Hoover HNL6166 will not start

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HNL6166 will not start

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 12, 2011 at 1:22 pm #60990
    Bernie
    Participant

    Got to go to this one on Monday customer has just moved house and machine was working ok before move.
    Now buy there description the only thing that happens is the drain pump runs for a minute or two then nothing whether it on a wash or spin program.
    I did get them to check that there is water getting to the machine they took the inlet hose off to make sure.

    Any Suggestions what to look at?
    Bernie

    February 12, 2011 at 1:32 pm #344452
    allan73
    Participant

    Re: Hoover HNL6166 will not start

    Had a candy with edge connectors off the module after a house move a while back. Might be worth a check ?

    February 12, 2011 at 2:50 pm #344453
    helo_75
    Participant

    agrred, theres a lip on the drum which puls the bottom edge connector off the pcb

    always happens when they been carried

    either that or they havent turned the water on

    February 13, 2011 at 3:27 am #344454
    gandh1
    Participant

    Re: Hoover HNL6166 will not start

    OR theres a drainage spike blocker/wodge of silicone inside the waste spike.

    is it a downpipe or spigot waste attachment???

    February 17, 2011 at 9:24 am #344455
    Bernie
    Participant

    Re: Hoover HNL6166 will not start

    You were spot on allan73 it was a connecter at the bottom of the PCB
    Thanks to all of you for your suggestions

    Bernie

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.