Indesit IDL40 was first 2 lights now just light 1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IDL40 was first 2 lights now just light 1

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 18, 2011 at 11:03 am #61146
    allan73
    Participant

    I was called to this with lights 1&2 flashing and I removed a chip of pottery from drain pump, job done I think. Turns out customer has removed a blanking nut from within the main cavity without telling me and not put it back 😡
    Can anyone tell me if there should be an o-ring inside this, as there isn’t and the customer can’t remember seeing one ?

    February 18, 2011 at 12:03 pm #345001
    Martin
    Participant

    Re: Indesit IDL40 was first 2 lights now just light 1

    Not entirely sure what “blanking nut” you’re referring to but all the same all connectors/components to and from the tub each have their respective O ring. So yes whatever it is it needs an O ring.!

    February 18, 2011 at 12:18 pm #345002
    allan73
    Participant

    Re: Indesit IDL40 was first 2 lights now just light 1

    Thanks Martin, I think the “nut” is described as overflow bodytop.

    February 18, 2011 at 3:17 pm #345003
    Martin
    Participant

    Re: Indesit IDL40 was first 2 lights now just light 1

    allan73 wrote:Thanks Martin, I think the “nut” is described as overflow bodytop.

    Got ya! In that case the O ring for it is = C00075695 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.