Bosch waa24171gb/12 Reset

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch waa24171gb/12 Reset

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 28, 2011 at 10:55 am #61352
    rolf
    Participant

    Went out to a Bosch maxx6 waa24171gb/12. The rinse light was flashing. Changed the worn out brushes but rinse light is still flashing.
    Is there a reset like the wae range.
    Thanks. 😕

    February 28, 2011 at 1:53 pm #345797
    electrofix
    Moderator

    Re: Bosch waa24171gb/12 Reset

    have you seen this thread

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=61233

    Dave

    February 28, 2011 at 2:00 pm #345798
    loopey
    Participant

    Re: Bosch waa24171gb/12 Reset

    you can try this , it has worked on a few …….


    To reset it.

    Turn the appliance knob to the off or reset position, 12 o’clock.

    Turn the knob to the 6 o’clock position.

    Press and hold the spin button.

    Whilst holding it, turn the knob to the 7 o’clock position.

    Continue holding the spin button for about 5 seconds.

    Release the button.

    Turn the knob to off.

    When your turn it back on it should have cleared the error code

    February 28, 2011 at 8:05 pm #345799
    rolf
    Participant

    Re: Bosch waa24171gb/12 Reset

    Thanks Dave and loopey went back .
    Tried what Martin suggested in the link and no go. Tried different variations and after five minutes of finger twister I tried it at eleven not one oclock and it jumped into life .
    So thanks again alls good with the world for now. 😆 .

    February 28, 2011 at 8:26 pm #345800
    loopey
    Participant

    Re: Bosch waa24171gb/12 Reset

    ok good result will remember that one for future finger twisting button pressing getting no were bosch lol , all for the changing of a simple part
    that has failed or worn out .

    Hope more people respond to this little rant 🙁

    February 28, 2011 at 8:46 pm #345801
    rolf
    Participant

    Re: Bosch waa24171gb/12 Reset

    To be honest loopey it’s a good idea in theory because it stops the customer from frying the motor by constantly selecting spin.

    When I changed the brushes there was no signs of the braid scoring the com like you often get with bosch brush changes.

    What would be handy is a list of all the reset procedures because it looks like we are going to see a lot more of this.

    March 1, 2011 at 12:58 pm #345802
    Bernie
    Participant

    Re: Bosch waa24171gb/12 Reset

    I would like to agree with Rolf
    “Would be handy a list of all the reset procedures”
    Bernie

    March 1, 2011 at 7:21 pm #345803
    loopey
    Participant

    Re: Bosch waa24171gb/12 Reset

    rolf wrote:To be honest loopey it’s a good idea in theory because it stops the customer from frying the motor by constantly selecting spin.

    When I changed the brushes there was no signs of the braid scoring the com like you often get with bosch brush changes.

    What would be handy is a list of all the reset procedures because it looks like we are going to see a lot more of this.

    Bernie wrote:I would like to agree with Rolf
    “Would be handy a list of all the reset procedures”
    Bernie

    yes i agree with both of you 110{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} would like to see a little more info on the bosch machine resets .

    I have hered on the grapevine as a customer did bye a part from bosch website , Fitted it and set the kitchen on fire , but thats just
    a rumour 🙁

    phil

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.