Bosch waa24171gb/12 Reset

[rolf]

Went out to a Bosch maxx6 waa24171gb/12. The rinse light was flashing. Changed the worn out brushes but rinse light is still flashing.
Is there a reset like the wae range.
Thanks. 😕

[electrofix]

Re: Bosch waa24171gb/12 Reset

have you seen this thread

http://www.ukwhitegoods.co.uk/modules.p … ic&t=61233

Dave

[loopey]

Re: Bosch waa24171gb/12 Reset

you can try this , it has worked on a few …….

To reset it.

Turn the appliance knob to the off or reset position, 12 o’clock.

Turn the knob to the 6 o’clock position.

Press and hold the spin button.

Whilst holding it, turn the knob to the 7 o’clock position.

Continue holding the spin button for about 5 seconds.

Release the button.

Turn the knob to off.

When your turn it back on it should have cleared the error code

[rolf]

Re: Bosch waa24171gb/12 Reset

Thanks Dave and loopey went back .
Tried what Martin suggested in the link and no go. Tried different variations and after five minutes of finger twister I tried it at eleven not one oclock and it jumped into life .
So thanks again alls good with the world for now. 😆 .

[loopey]

Re: Bosch waa24171gb/12 Reset

ok good result will remember that one for future finger twisting button pressing getting no were bosch lol , all for the changing of a simple part
that has failed or worn out .

Hope more people respond to this little rant 🙁

[rolf]

Re: Bosch waa24171gb/12 Reset

To be honest loopey it’s a good idea in theory because it stops the customer from frying the motor by constantly selecting spin.

When I changed the brushes there was no signs of the braid scoring the com like you often get with bosch brush changes.

What would be handy is a list of all the reset procedures because it looks like we are going to see a lot more of this.

[Bernie]

Re: Bosch waa24171gb/12 Reset

I would like to agree with Rolf
“Would be handy a list of all the reset procedures”
Bernie

[loopey]

Re: Bosch waa24171gb/12 Reset

rolf wrote:To be honest loopey it’s a good idea in theory because it stops the customer from frying the motor by constantly selecting spin.

When I changed the brushes there was no signs of the braid scoring the com like you often get with bosch brush changes.

What would be handy is a list of all the reset procedures because it looks like we are going to see a lot more of this.

Bernie wrote:I would like to agree with Rolf
“Would be handy a list of all the reset procedures”
Bernie

yes i agree with both of you 110{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} would like to see a little more info on the bosch machine resets .

I have hered on the grapevine as a customer did bye a part from bosch website , Fitted it and set the kitchen on fire , but thats just
a rumour 🙁

phil

[Author]

Posts