- This topic has 6 replies, 3 voices, and was last updated 15 years ago by
.
-
Posts
-
hi guys i have a waa28165gb bosch washing machine first things first the pcb burnt out so i replaced it nnow it does random things , it kept the fill valves open all the time except when the power was off checked these their ok that then stoped and now it will onl fill a little bit and onnly through the pre wash and not much water so my question is how do i reprogram the board ( the instructions that came with the new board are usless) and could it be another fault 😕
Re: bosch waa28165gb fault
Check all the connections are good is about the only advice I can offer as that can cause oddball errors.
K.
Re: bosch waa28165gb fault
Why was the original board ‘burnt out’?
In most cases its a fault elsewhere that causes major damage to the boards, you don’t mention anything else.
Failure to rectify the cause of failure will result in instant damage to the new board.
- You must be logged in to reply to this topic.