bosch waa28165gb fault

[janboy]

hi guys i have a waa28165gb bosch washing machine first things first the pcb burnt out so i replaced it nnow it does random things , it kept the fill valves open all the time except when the power was off checked these their ok that then stoped and now it will onl fill a little bit and onnly through the pre wash and not much water so my question is how do i reprogram the board ( the instructions that came with the new board are usless) and could it be another fault 😕

[kwatt]

Re: bosch waa28165gb fault

Check all the connections are good is about the only advice I can offer as that can cause oddball errors.

K.

[janboy]

Re: bosch waa28165gb fault

have checked all connections all are good its beyond me !!!

[janboy]

Re: bosch waa28165gb fault

oh well , given up , bosch was no help at all and no one seems to know

[kwatt]

Re: bosch waa28165gb fault

Did you try the old PCB back in it?

K.

[iadom]

Re: bosch waa28165gb fault

Why was the original board ‘burnt out’?

In most cases its a fault elsewhere that causes major damage to the boards, you don’t mention anything else.

Failure to rectify the cause of failure will result in instant damage to the new board.

[kwatt]

Re: bosch waa28165gb fault

Good call Jim, I missed the burnt out bit.

K.

[Author]

Posts