Candy Go 1482-80 PCB fail

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Candy Go 1482-80 PCB fail

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 22, 2011 at 11:14 pm #61820
    Peepo
    Participant

    Hi, The main PCB has failed in our Candy Go 1482-80. Multiple tracks have burnt out on the underside.
    Can anybody point me in the right direction to get a replacement please?
    Also, we still have the receipt and the machine apparently has a 5 year parts warranty. How does that work? I am guessing that you need to have a Candy approved engineer to fix the machine and that labour would cost a fortune? :rolls:
    Thanks in advance for any help.

    Rob.

    March 23, 2011 at 12:19 am #347716
    gandh1
    Participant

    Re: Candy Go 1482-80 PCB fail

    candy labour approx £100

    would be worth going with though, because its very common for candy/hoover motors to take out the main pcb. both parts combined = write off of the appliance.

    you could alternatively post a hi-res pic of the pcb & burnout, and we can advise what may have caused that???

    March 23, 2011 at 7:12 am #347717
    Peepo
    Participant

    Re: Candy Go 1482-80 PCB fail

    I’ll post a hires scan of the PCB this evening after work.

    Thanks.

    March 24, 2011 at 5:06 pm #347718
    Peepo
    Participant

    Re: Candy Go 1482-80 PCB fail

    Scan as promised.

    March 24, 2011 at 5:11 pm #347719
    Specialist01269
    Participant

    Re: Candy Go 1482-80 PCB fail

    Hi: If you follow the wires from the 3 burnt pins you should find what’s caused the burning on the other end. Are any of the components on the other side looking burnt?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.