Miele T230C Tumble Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele T230C Tumble Dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 28, 2011 at 11:25 am #61915
    WhiteVanMan1
    Participant

    The appliance is removing water from the clothes, but not pumping the water up to the drawer. I have tested the pump and it is ok. I suspect the magnetic switch situated in the pump reservoir. Has anyone come across this? Also, there is a non return valve sort of arrangement, consisting of a chrome ball bearing in a tube, which is part of the sump. I’m not sure what this is supposed to do. Can anyone shed any light please? Cheers. Steve.

    March 29, 2011 at 7:56 am #348003
    Seamy
    Participant

    Re: Miele T230C Tumble Dryer

    Yes theres a non return valve system, best thing to do is run a cable direct to pump from a plug just to test that the pump runs ok & theres no blockage. Fluff/dirt can foul the switch & pump inlet & cause fault described.

    March 29, 2011 at 12:24 pm #348004
    WhiteVanMan1
    Participant

    Re: Miele T230C Tumble Dryer

    Hi Seamy,

    Thanks for your reply. I’ve done all that, and the pump runs and pumps up to the drawer. There are no blockages. I’ll have to give it another coat of looking at.

    Steve

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.